HD6000 Series Shark Glam™ Hot Tool Air Styling & Drying System - Get to know your attachments

Use on all hair types to dry, smooth, defrizz, and straighten—all at the same time.  

When using the Silki Straightener on wet hair mode, we recommend high air flow and high heat. When using the straightener on dry hair mode, we recommend medium heat and medium flow.  Adjust as needed.  For curlier hair types such as Type 3 and Type 4, we recommend high heat on dry mode. 

Make sure the Silki Straightener is fully clicked into place before use. You will know the accessory is locked in when you hear or feel a click, and when the two solid arrows are aligned. When locked the straightener handle lines up with the UI on the device. If needed, twist the Straightener slightly as you push it on. If the accessory still falls off before or during use, please call a customer service representative for additional assistance. 

To open the straightener, press and slide the hinge lock on the handle of the straightener down. To close the straightener, press the straightener clamps together and slide the hinge lock back up. 

If you get frizz when using the straightener decrease the airflow. 

Use smaller sections on the top section of your hair. Hold the section perpindicular to your scalp for best root access.
 

Attach the styler to the hair dryer and use it on all hair types for both wet or dry hair. For styling wet hair, dry, smooth, defrizz, and add volume—all at the same time. For reviving your style or for a straighter finish, style with dry mode. Smoothing boar bristles enable grabbing, smoothing, and shining, while detangling bristles enable combing and detangling. The heated comb portion helps to add shine and smooth out any tough curls or frizz. Best for straight, wavy, curly, or coily hair. 

The recommended settings for the Glossi Styler are high heat and medium airflow for wet mode and high heat and low airflow for dry mode.

If you find that you get frizz when using the brush, decrease the airflow. If you still get some frizz, finish styling by brushing down the outside of the hair and pulling the hair through the heated comb then use Cool Shot to relax the cuticle. Try using hair products made for your hair type that help to reduce frizz before and after styling.

Attach the Auto-Wrap Curlers to create waves or curls with less heat. The Auto-Wrap Curlers use air to wrap your slightly damp hair around the barrel and dry it in place. Reference our how-to videos to learn how to properly use the Auto-Wrap Curlers.

The recommended settings for the Auto-Wrap Curlers are high heat and high airflow. 

Make sure the Auto-Wrap Curler you are using is fully clicked into place before use. You will know the Auto-Wrap Curler is locked in when you hear or feel a click, and when the two solid arrows are aligned. If needed, twist the Auto-Wrap Curler clockwise slightly as you push it on. If the Auto-Wrap Curler still falls off before or during use, please call a customer service representative for additional assistance. 

There are 2 curling barrels included in your model. The left barrel curls your hair in a clockwise direction, while the right barrel curls in a counterclockwise direction. To change the direction of your curls, simply switch barrels.

Attach the Curl-Defining Diffuser for fast, consistent drying from root to tip. To enable curl perfection, our Curl-Defining Diffuser features retractable and extendable prongs. Retract the prongs for shorter, finer hair and less heat on the scalp. Extend the prongs for longer, thicker hair and to reach and lift at the root. Best for wavy, curly, and coily hair.  

The recommended settings for the Curl-Defining Diffuser are low heat and low airflow.

The prongs on the Curl-Defining Diffuser extend and retract to allow a customized diffusing experience. Slide the lever left or right to extend or retract. Extend the prongs for very thick, long, or coarse hair. They help reach the roots, and will help if you have a difficult time drying them. Retract the prongs for shorter or finer hair, or when you only want to dry the ends.

Attach the Styling Concentrator to dry and style in fewer steps. The Styling Concentrator rotates, so airflow is always in line with your round brush. Use the airpath for a quick, all-over dry, then finish with a round brush for smoothing, shaping, and bending. Best for straight, wavy, curly, and coily hair. 

The recommended settings for the Styling Concentrator are high heat and high airflow.

Finish off your look or touch up next day with the FrizzFighter™. Hover it over your roots and glide down along your dry hair to smooth frizz and flyaways.

Try using ScalpShield with the FrizzFighter. To activate, hold down the temperature button for 3 seconds unitl UI LED pulses blue. 

Try not gliding down all the way down your hair. This will help to maintain volume and curls while taming any frizz at the top.

Attach this styler to the hair dryer and use it on all hair types for wet hair only. Dry, smooth, defrizz, and add volume—all at the same time. Smoothing boar bristles enable grabbing, smoothing, and shining, while detangling bristles enable combing and detangling. Best for straight, wavy, curly, or coily hair. 

The recommended settings for the Oval Brush are high heat and high airflow.

For curly or coily hair types, use the wide tooth comb to expertly stretch and lengthen natural curls from root to tip. Use this for a naturally stretched look or use this to prep your hair for straightening with the Silki Straightener. 

The recommended settings for the Wide Tooth comb are high heat and high airflow.