This article contains the TH200 Series Shark™ TurboBlade Cool + Heat Owner's Guide. This supports the following models: TH200, TH202WH, TH202Q, TH202QBK and TH202QWH.
Popular Topics
What are the product specifications?
What is the weight of the unit? The weight of the unit is 21.85lbs (9.91kg)
What are the dimensions of the unit? The dimensions of the unit are 45.9" H x 13.8" W x 11.8" D (116.7cm H x 35cm W x 30cm D).
What is the voltage of the unit? The voltage is 120V.
What is the wattage of the unit? The wattage of the unit is 1400W.
What is the amperage of the unit? The amperage of the unit is 10A.
What is the frequency of the unit? The frequency of the unit is 60Hz.
How many speeds does the unit have? The unit has 10 fan speeds.
How long is the product guarantee? This products comes with a 2-year guarantee. Please refer to the Guarantee / Warranty section in the Instruction Booklet for detailed information on activation and duration, as it may vary by region.
How many oscillation angles does the unit have? If you have the TH200 model (the model number is found near the QR code on the back of the base) you have 1 oscillation angle setting (180°). All other models have 3 (45°, 90°, 180°).
What is the maximum oscillation angle of the unit? The maximum oscillation angle is 180°.
What is the airflow of the unit? The maximum airflow of the unit is 1180CFM
How do I take apart my unit?
We do not recommend taking your unit apart as it is only safe to operate when fully assembled. However it is possible to disassemble if you need to ship it back to us. You will need a screwdriver.
1) Start by removing the blades. Make sure the blade is pointing forward, then give a strong tug on the blade and it should come out. It is normal for this to require a fair amount of force.
2) Next, remove the pole from the base; you will need your screwdriver. Rotate the unit all the way counter-clockwise. Once it is fully rotated, slot the screwdriver into the opening behind the pole to unclip
it, then rotate the pole Counter-Clockwise to remove it.
3) Finally, to remove the base plate, locate the clip on the underside and insert your screwdriver to unclip it. The plate will easily rotate off.
What fan and heat settings does the unit have?
Depending on the unit purchased, settings may differ. Please refer to the Quick Start Guide for detailed information.
Fan functions
SPEED ADJUST Press up and down arrows to scroll between fan speeds 1-10.
FAN MODES Press to cycle between Sleep, BreezeBoost and Natural Breeze settings.
Heat functions
THERMO IQ MODE™ Press up and down arrows to set desired temperature. The heater will automatically adjust based on your selection.
HEAT MODES (remote only) Press the mode button to cycle between Comfort and Focus settings.
Shared functions
OSCILLATION Press the oscillation button to cycle through oscillation range options. For models with three settings, setting 1 is 45 degrees, setting 2 is 90 degrees, and setting 3 is 180 degrees.
TIMER Press the timer button to cycle through timer settings. Automatically turns off power after 1, 2, 4, or 8 hours.
MUTE CHIME Press and hold oscillation and timer buttons for 5 seconds to mute chimes. Repeat to re-enable.
ANGLE ADJUST Press the left and right arrows to slightly adjust the direction of fan.
PIVOT AND TILT Manually adjust the fan blade's orientation and tilt to personalize your airflow.
NOTE: The blade only rotates counterclockwise up to 90 degrees.
Set-up & General Use
How and where should I set up my unit?
Do not place appliance on unstable surfaces such as chairs or other furniture, and do not use in the following areas: a) Wet or damp surfaces b) Outdoor areas c) Spaces that are enclosed and may contain
explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust). This heater is not intended for use in bathrooms, laundry areas, or
similar indoor locations. Never locate heater where it may fall into a bathtub or other water container. Please read the Safety Instructions in the Instruction Booklet for details about where the unit should
and should not be set up.
1) To set up your unit, start by assembling the Base to the Base Plate by aligning the red symbols on each and rotating the base until it clicks into place.
2) Next, align the arrow printed on the pole with the symbol printed on the Base. Twist the Pole clockwise until you hear it click. Now you can remove the tape on the bottom of the Base.
3) Remove the assembly tape and cardboard from the Pole. Line up the red arrow on the Blade with the one on the inner Pole. Press the Blade firmly into the Pole until it clicks into place. Repeat on the other side.
4) Install the 2 AAA batteries in the remote. Make sure that they are installed with the correct polarity ( + and -). Store the remote on the magnetic mount on the back of the Pole.
You are now all set!
How do I switch from fan to heat?
To switch from fan to heat, use the dial on the side of the unit. There is a guide on the unit to indicate which orientation is fan and which is heat. When it has been switched, the lights on the on-unit display
and remote will change to red when the unit is on heat, or blue when the unit is on fan.
How long is my Shark TurboBlade Fan protected?
Your investment is protected with a 2-year guarantee when you register with Shark—giving you total peace of mind and confidence.
Can I position the fan exactly how I like it?
Absolutely. Whether you're chilling on the sofa, working at your desk, or lying in bed, you can tilt the blades vertically and horizontally, twist the fan vents in two directions, (or use the slider to direct the heat vent), and enjoy up to 180° oscillation—for airflow exactly where you need it.
How will the Shark TurboBlade keep me cool?
From a gentle whisper of air to an instant cooling blast, choose from 10 precision fan speeds, plus a Boost Mode and a Natural Breeze mode. Whether you're working, sleeping, or relaxing, there's a perfect setting for every moment.
How will the Shark TurboBlade warm me up?
Enjoy one of our three heat modes for the ultimate customised heat experience. Comfort mode provides gentle heat for sustained use at close range and Focus mode provides powerful directed heating for personal use from further away. ThermoIQ mode allows you to choose your temperature, from 16-32 celcius / 60-90 fahrenheit, and the heater will rapidly achieve and maintain this temperature for you. So whether you are trying to warm yourself or your space, we've got you covered!
Does it come with a remote? What can it do?
Yes, and it’s not just any remote. Magnetically attachable to the fan, this smart control lets you power up, fine-tune speeds, adjust oscillation and angle, and activate Speciality Fan and Heat Modes. Fan modes include: Sleep for quiet nighttime comfort, Boost for an instant blast of cooling power, and Breeze to mimic the natural ebb and flow of outdoor air. Heat modes include: Comfort for gentle heat at close range, Focus for powerful directed heating and ThermoIQ mode for rapidly heating to and mainting your chosen temperature (16-32 celcius / 60-90 fahrenheit).
Is the fan suitable while I sleep or work?
Yes. Designed with customizability in mind, the TurboBlade Fan features a wide range of settings and blade adjustability, so you can focus, relax, or drift off without disturbance.
Is the fan mode suitable for large rooms?
Yes. Thanks to its ultra-wide oscillation, and directional airflow, it’s perfect for bedrooms, lounges, offices, and open-plan spaces. The fan is built to circulate air effectively in larger areas.
Is the heat mode suitable for large rooms?
The heater uses 1400 watts (US) and 2100 watts (UK/EU) on it's highest setting to heat the room. This is suitable for large rooms but will depend on the individual variables of your house like insulation, ceiling height, etc..
Is it easy to move around the home?
The Shark TurboBlade Cool and Heat is designed to be robust and deliver the ultimate personalized comfort in your space. It has a carrying handle to help you lift it, however we recommend finding the ideal space in your home for regular use.
How easy is it to clean?
The Shark TurboBlade Fan is designed with removable Dust Defense panels that help trap dirt before it reaches the fan. These are easy to pop out and clean.
Will I lose the remote easily?
Not a chance! The magnetic remote snaps securely to the fan’s body, so it’s always within reach and never misplaced.
How does the Shark TurboBlade Fan work without visible blades?
Instead of traditional exposed blades, the TurboBlade uses a bladeless design with internal high-velocity airflow technology, channeling air through precision-shaped vents to deliver smooth, powerful, and uninterrupted airflow with a modern, safe design.
What do the buttons on the display do? What do the buttons on the remote do?
On-unit display
BRIGHTNESS Press to adjust the brightness of the display panel. Choose between 4 levels of brightness.
POWER Press to power unit on or off. It may take a moment for the unit to cool down after the heat has been turned off.
OSCILLATION Press to cycle through oscillation range options. Setting 1 is 45 degrees, setting 2 is 90 degrees, and setting 3 is 180 degrees.
FAN/THERMO IQ ARROWS When in Fan mode, press the arrows to adjust fan speed up or down. When in Heat mode, press the arrows to adjust the thermostat temperature.
Remote
Fan functions
SPEED ADJUST Press up and down arrows to scroll between fan speeds 1-10.
FAN MODES Press to cycle between Sleep, BreezeBoost,™ and Natural Breeze settings.
Note: some models have Highand Low versions.
Sleep mode: Mute chimes, dim lights, and switch to an ideal fan speed for sleep.
BreezeBoost™: For a powerful burst of airflow.
Natural Breeze: Varying airflow patterns to simulate natural wind.
Heat functions
THERMO IQ MODE™ Press up and down arrows to set desired temperature.
The heater will automatically adjust based on your selection.
HEAT MODES (remote only) Press the mode button to cycle between Comfort and Focus settings.
Note: some models have High and Low versions.
Comfort: Soothing warmth for sustained use.
Focus: Powerful, directed heating.
Shared functions
OSCILLATION Press the oscillation button to cycle through oscillation range options. Setting 1 is 45 degrees, setting 2 is 90
degrees, and setting 3 is 180 degrees.
TIMER Press the timer button to cycle through timer settings. Automatically turns off power after 1, 2, 4, or 8 hours.
MUTE CHIME Press and hold oscillation and timer buttons for 5 seconds to mute chimes. Repeat to re-enable.
ANGLE ADJUST Press the left and right arrows to slightly adjust the direction of fan.
Why are the fan blades not moving / tilting?
Make sure that the blade has been firmly placed onto the unit. While keeping the other side of the fan stable, push the blade against the pole until there is no gap between the blade and the pole. You should
hear a click when the blade has been fully inserted correctly.
Why is my Turboblade tripping the circuit breaker?
Your Turboblade Cool + Heat draws the most power when you turn it on. If your circuit breaker trips, please make sure you are plugged directly into a wall outlet on a 15-amp circuit breaker. If not, or you are unsure, please plug the vacuum into an outlet on a different circuit breaker and attempt to power it on. If you continue to experience issues tripping the circuit, you may wish to use a 20-amp outlet, indicated by a T-shaped slot. It is also important that the unit be the only appliance plugged into an outlet when in use. Make sure to power off and unplug microwaves, air conditioners, heaters, and similar large appliances on the same circuit. If your Turboblade trips in ThermoIQ mode, you may wish to try switching to Focus or Comfort modes, or move to a different outlet.
Why is the fan unsteady?
Make sure the fan has been assembled correctly and that all parts have been completely clicked into place. Check the connection points where the base meets the base plate, and where the pole
connects to the base. If the fan is still unsteady, disconnect the parts, then reassemble them, making sure they all click securely into place. Please see question "how do I take apart my unit" if you need
help disconnecting any parts.
Why has the airflow gotten less powerful over time?
To make sure you are getting the optimal airflow from your TH200 series, make sure the fan is positioned at least 6 feet (1.83m) away. If you are too close to the fan you may not feel the airflow as strongly.
You may need to clear out the Dust Defense™ filter - excessive Dust Defense™ debris could result in an impact to performance. For cleaning instructions, see the "How do I clean my fan?" FAQ.
How do I carry the unit?
Carry the unit by the handle on the base while supporting the air duct.
Where do I put the remote?
You can magnetically store the remote on the top of the pole where the sticker has an outline of the remote.
Why is my fan changing speeds on its own?
The fan may be in Natural Breeze mode, which changes automatically to simulate natural wind. To deactivate a fan specialty mode, press change the fan speed or the Specialty mode button on the remote
Why is my remote / on-unit screen not lit up?
Firstly, please check that the batteries are correctly installed in the remote and that the unit is correctly plugged into an outlet.
If this occurs during use, note that the lights on your screen and remote will turn off after 20 seconds. To wake them up you can press any button on the remote or screen
Why is my heater changing speeds on its own?
The heater may be in Thermo IQ mode™, which adjusts heater output based on the current room temperature. Thermo IQ will operate by producing heat until it reaches the temperature that you set on the
unit. To change the set temperature, use the arrows on the remote or on-unit display.
Why are the lights dim?
The fan may be in Sleep Mode, which dims the lights. To deactivate, press the Specialty mode button on the remote until Sleep Mode is turned off.
The dimness can also be adjusted with the Brightness icon on the on-unit display
Why did my unit turn off on its own?
In Thermo IQ mode™, the unit will turn off once the room has reached your target temperature. Additionally, as a safety measure, the unit will turn off if the room tempearature ever reaches 100 degrees
Fahrenheit, or after 8 hours of inactivity when on heat mode.
In other instances, the unit will turn off if timer mode was activated. The timer will turn the fan off after 1 to 8 hours. To turn off the timer, press the Timer button on the remote until it reads "0" on the remote
screen.
Why does my fan not beep/chime when I press buttons?
Your fan may be on silent mode. Hold down the timer and oscillation buttons on the remote for 3 seconds to disable the feature
Why is the heat output low?
This product has three different heat modes, optimised for different scenarios. You can change between them using the "mode" button. The lowest is Comfort mode, and this is meant to be used at close
range, for longer periods of time. The middle mode is Focus, and that is meant to warm a personal space from further away. The hottest mode is ThermoIQ™. Here you can set the temperature you wish you
achieve and the fan will output the highest amount of heat to achieve and sustain that temperature. When the dial on the unit is set to HEAT setting, you can use the MODE button to cycle through these
three heat modes.
How do I disable beeping / chiming?
Hold down the timer and oscillation buttons on the remote at the same time for 3 seconds to disable chiming. Repeat to re-enable.
What are the weight and dimensions of the Fan?
The TF200 weighs 14.99lbs. The dimensions for the unit are as follows: Height: 50.67in Length: 12.76in Width: 37.4in
What is the length of the cord?
6 feet
What is the electrical usage of this fan?
Voltage: 120V Wattage: 192W Amperage: 1.6A
Cleaning & Maintenance
How often should I clean the unit / Dust Defense™
filter and how do I clean my unit?
Unplug the fan before doing any cleaning or maintenance. We recommend cleaning the fan every 6 months or as needed.
To clean the external unit, unplug from the power source and wipe down the exterior with a microfiber cloth dampened with warm, soapy water. Avoid excess water and abrasive chemical cleaners to
prevent damage. Ensure that the heating element has cooled before wiping down.
To clean the Dust Defense™ panels:
1. Remove the Dust Defense panel from the unit by gently pulling on the finger tab. Note: the mesh filter does not need to be removed from the Dust Defense panel.
2. Use a vacuum cleaner on low speed with a soft brush attachment OR a cloth/towel to remove debris from the Dust Defense panel and the internal mesh screen. Do NOT use abrasive chemical cleaners.
3. (OPTIONAL) If debris is stuck in between the mesh filter and the Dust Defense panel, the mesh filter can be removed by gently pulling the mesh filter out of the tabs on the Dust Defense panel. Rinse the
mesh filter and Dust Defense panel with room temperature tap water. Be sure to completely dry the screen and panel for 12 hours before reinstalling. Do NOT use the fan when the mesh filter is wet.
4. Replace the Dust Defense panel by inserting the tabs on the bottom of the panel into the indents on the unit and pushing the panel inwards until it clicks into place.
How do I replace the batteries in the remote?
We recommend changing the batteries in the remote control every 12 months, or as needed.
1. To access the batteries, push down gently on the battery door on the back of the remote, then slide the door off. Remove the batteries from the chamber and follow local ordinances for battery disposal.
2. Insert 2 new AAA batteries into the remote. Make sure the batteries are installed in correct orientation as shown in the battery chamber.
3. Slide the battery door back into place on the back of the remote.